|
Presenter |
Title
|
|
Algirdas SOKAS |
Graphics Programming for Designing Bézier Surfaces |
|
Livija CVETICANIN |
Dynamics of the Strong Nonlinear Archetypal Oscillator |
|
Yurii STRELIAIEV |
Indentation of a Circular Cylindrical Punch with a Curved Base into an Elastic Half-Space in The Presence of Coulomb Friction |
|
Sergii GREBENYUK |
Longitudinal Shear Modulus of the Composite Material with Hollow Fibers |
|
Borisov Andrey VALERYEVITCH |
Two-Dimensional and Three-Dimensional Models of Anthropomorphic Robot and Exoskeleton with Links of Variable Length |
|
Artūras KILIKEVIČIUS |
Dynamic Behaviour Analysis of Optical Linear Encoder under Mechanical Vibrations |
|
Artūras KILIKEVIČIUS |
Investigation of Airplane Propeller Dynamic Parameters |
|
Igor Sergeevich PODLESNYKH |
Verifying Regulatory Documents for Solar Radiation Level Control when Estimating Stress-Strain State of the Spans Based on the Orthotropic Slab |
|
Grzegorz MIECZKOWSKI |
Determination of Stress Intensity Factors for Elements with Sharp Corner Located on the Interface of Bi-Material Structure or Homogeneous Material |
|
Grzegorz MIECZKOWSKI |
Prediction of the Fracture Process of Materials Containing Inclusions with Sharp Corners |
|
Waldemar MUCHA |
Review of Model Order Reduction Methods Applied in Hybrid Simulations |
|
Larisa Vladimirovna KONCHINA |
Modeling of the Equipment for Mechanical Sorting of Bulk Products |
|
Agnė GERVYTĖ |
Bending Plates at Shakedown: Analysing the Residual Displacements by the Scanning Method |
|
Dariusz SZPICA |
Modelling of the Operation of a Pneumatic Piston Engine |
|
Dariusz SZPICA |
The Use of a Pressure Sensor to Evaluate the Low Pressure Pulse Gas Injectors Functional Parameters |
|
Svitlana HAVENKO |
Investigation of Factors Influencing the Operational Characteristics of Aromatized Imprints |
|
Vytautas MAKARSKAS |
Research of the Dynamics Properties of Hail Imitation Stand |
|
Ona LUKOŠEVIČIENĖ |
Time-Dependent Reliability Index Analysis of Steel Beams |
|
Jonas MATIJOŠIUS |
Research of the Influence of Environmental and System Internal Disturbances on the Formation Process of Fine Precision Raster Structures |
|
Jonas MATIJOŠIUS |
Research of Diesel Engine Dynamic Parameters and Exhaust Gas |
|
Ilya RAVODIN |
Development of a Model to Moving Load for Analyzing Oscillations of an Bearing System with Elastic Constraints in the Finite Element Complex Midas NFX |
|
Algirdas MAKNICKAS |
Investigations of the Structural Resistance of a Paint Bullet Shot Device |
|
Małgorzata JOHN |
Application of Incremental Techniques in the Manufacture of Exoskeleton Elements for Children |
|
Małgorzata JOHN |
Numerical and Experimental Tests of Samples Made from ABS Material in the Aspect of Application in Elements of the Exoskeleton for Children |
|
Antoni JOHN |
The Application of Model-Based Tests for Analysing the Consequences of Methane Combustion in a Mine Heading Ventilated Through a Forcing Air Duct |
|
Antoni JOHN |
Selected Issues in the Friction Process for Microcontact Rolling-Sliding in the 3D Model Obtained from Microtomograph |
|
Tomasz SCHLIETER |
Structural Optimal Design of an Airfoil System for Many Criteria |
|
Andrzej BORAWSKI |
Simulation Studies of the Influence of the Delivery Vans Load Weight on the Course of the Braking System Elements Heating Process |
|
Andrzej BORAWSKI |
Empirical Research on the Influence of Friction Material Copper Content on Its Tribological Properties |
|
Natalia MOLĘDA |
The Numerical Simulations of the Bioresorbable Stents Crimping Process |
|
Andrzej BORAWSKI |
Empirical Studies on the Influence of the Paint Coat Applying Method on Its Mechanical Properties |
|
Olaf POPCZYK |
Analysis of a One-Dimensional Steady Heat Flow in a Variable Thermal Conductivity Metamaterial Using Kansa Method and Analytical Approximation of the Heaviside Function |
|
El-haddi MECHEKOUR |
Graph-Based Feature Recognition During CAD Modelling |
|
Jelena SELIVONEC |
Investigation of Screw Connection Characteristics with Special Construction Nut |
|
Gražvydas KAZOKAITIS |
Spherical Piezoelectric Magnetic Drive |
|
Mateusz HOLEK |
Analysis of Composites with Rigid Fibers by Numerical Methods |
|
Grzegorz KOKOT |
Experimental Testing Optical Methods as the Validation Tool for FEA Models |
|
Petras VIRŽINTAS |
Automated Logistic Systems Conveyor Merge Zone Performance Research |
|
Yasmina LAHIOUEL |
NLP-Differential Algorithm Approach for the Optimization of Looped Water Distribution Networks |
|
Oleksandr KAPUSTYNSKYI |
Optimization of the Parameters of Local Laser Treatment for the Creation of Reinforcing Ribs in Thin Metal Sheets |
|
Hari Prasanna MANIMARAN |
Comparative Numerical Analysis on External Ballistics of 4 And 6 Grid Solid Rocket Motor |
|
Robertas MIKALAUSKAS |
Investigation of Vibroactivity of the Mechanical Equipment Aiming to Reduce Emitting Noise |
|
Viktors GUTAKOVSKIS |
Combustion Chamber of Adaptive Type of the Perspective Multi-Mode Aviation Gas-Turbine Engine |
|
Paulius KARPAVICIUS |
Real Time Measurement of Cutting Tool Vibrations During Milling Operation |
|
Yuliia KHMUROVSKA |
Equipment for Concrete Irradiation Experiments |
|
Gytautas BALEVICIUS |
Machining of Hard-Brittle Materials: Ultrasonic Assistance and its Role in Brittle-Ductile Transition |
|
Vytautas OSTASEVICIUS |
Robotized Vibrational Incremental Sheet Forming |
|
Sandra MIKUCKYTE |
Investigation of Intervertebral Disc Nutrition and Mechanical Behaviour under Cyclic Loading |
|
Paulius KARPAVICIUS |
Possibilities of Milling Process Monitoring in Cloud Manufacturing Applications |
|
Audrius JUTAS |
Lattice Distortion Model. Events’ Scaling on a Horizon of Space-time if ds2<0 |
|
Valentinas VARNAUSKAS |
Investigation of the Technological Parameters Influence on the Properties of Welded Joint by Welding AISI 304 Steel |
